Oskar complete

The Oskar has come to completion.

Nothing more to add to that.

Have a look.

Cheers,

Martijn

MK44 Prototype Completed

MK44 Prototype Complete

It's done and dusted... with some pigments (ba-dum zing).
I washed this guy with oils.

Added some last minute details (a coiled cord coming off his helmet) and dusted him up with a layer of pigments.

Sorry for not taking your through this one step by step, but the pics should speak for themselves...

Beteer pictures of the finished thing are to follow...

Building up dirt and decay.

So I've been adding thin wash layers of dirt.
Pin washes, spatter, streaking... all using oils. And as requested by a mate I took a lot of pics...
Here they are.

First I did a thin wash/pin wash to blend together the colours of the flaked paint and rust that's underneath and to make those panel lines pop a bit more. Add some contrast.
I used lamp blank and burnt umber.

Then I added some rust tones around the flaked and chipped areas. I applied a thin 'aura' of the rust tone around these areas and also started painting some streaks. The rusty tones are a varying combination of oxide red, yellow ochre and burnt umber.

For the streaks I tend to put down to much paint at first.. I then simply blend it in with either q-tips of a dry brush. Sometimes I dab on little dots of untwined paint, let that site for a few minutes and then use a dry (or very lightly terpenoid moistened brush) and pull down the paint to create the streak

After this, I added more streaking, some dirt splattering and oil and exhaust stains/dirt.
Still keeping everything thin and transparent. Building up layer upon layer.

Next I want to put down a thin layer of clear varnish, and add a heavier stain to the bottom half of the hull and underside of the turret and engine. And after that add some more 'fresh' streaking here and there and I think we're about done at that point...

So stay tuned.

Cheers,
Martijn

Oskar, Rust Details & Decals

So this thing is breezing along very nicely.

When the flaking effects were done (by pulling off the masking liquid) the rust marks were still a little coarse, so I added some details, by applying acrylic pain with a 0 brush and stamping it on with this green textured stuff that architectural model builders use to indicate hedges and other greenery.
Of course I forgot to take a picture.. I'll do it next time, ok! Get of my case!!

Anyway rust details done. Put down a layer of clear coat to prepare for the decals.
Decals went down like a dream.

Then another layer of clear coat went on to seal in the decals.
Hence all the shinyness...

Oh and I also painted the bottom.

Cheers!
Martijn