Auricom Griffon completed

Aaaand we're done.

After adding another light brown oil wash, some pigment and some grass coming out of the cracks in the concrete slab on the deck, I declared the base 'done'.

I painted the little metal rod that connect the craft to the base a matt black.

And put it all together.

Check it out below (and let me know what you think in the comments).

Cheers!
Martijn

Auricom Griffon Base

Just a quick update on the base...

I added the finish line markings, a wash of black/blue/green oil paint and some rust streaking.

Not much else to add. 

Next up a couple of more washes and streaking, then pigments. And some details.

Auricom Griffon base

So... I've been making some more progress on that base. It's slow going, but going.

I filled up the whole thing using acrylic filler mixed with sand and rubbed some chalk on it to change up the texture here and there. I want the track to look quite rough... in the game this thing is based on there's a lot of exploding vehicles and stuff. I want to show some of that violence. I'll working on bit of debris and wreckage from some of the losers...

Also scratched some reinforced concrete slabs for the deck bit at the top. 

Then I painted the sides black and masked them off after a couple of clear coats.. put primer on the rest and masked off the track's stripe pattern.

Painted on some Tamiya flat yellow with a brush and that's about it...

It still looks kind of dinky right now... but it will get some washes and pigments and I'm hoping this will pull it all together somewhat. Fingers crossed.

Auricom Griffon Base Restart...

After looking at this thing for a while I realized, I needed to soalve the problem of the model twisting on the base...

I got a tip on one of the forums I frequent about using square tube to attach the model to the base (feeling stupid for not thinking of that myself)... I decided to double back a little bit and ready some of the base. 

I ripped out most of the polystyrene sheets and put in a square bit of styrene tube. I found some metal bar (i think it's pyrite) that fits it perfectly. I attached the tube into the base exactly like I had done with the round tube (using poly clay and plaster)..

In building up the further layers of polystyrene I glued in bits of plastic card that fit around the tube. So bits of card with square holes in them, glued to the tube with SG and to the polystyrene with wood glue (about the same as white glue I think).

This was done to make sure it wouldn't move under the weight of the model.

The bottom of the Griffon now had a gaping 4mm hole in it... so I made it bigger. Put in a piece of the same square tube that went all the way to the 'ceiling' inside the Griffon. Then I fixed it in place at the hole with SG and green stuff and on the inside by using a thin wooden stick to push a ball of GreenStuff all the way up into the tube and stick it to the ceiling on the inside of the tube... hope that makes sense. Anyway it's in there solid.

I put a little weld seem and some bolts on the tube end sticking out and painted it (also put some greebly on the top of previously failed attempts at fixing the model to the base)...

With that done I started putting some filler on the base. I used acrylic filler (which I think is basically thick unpigmented acrylic paint) and mixed it with cat litter.... a total experiment as I had never worked with the stuff. 

Well the cat litter absorbed a lot of moisture from the filler quite fast, making it quite difficult to spread out... it also shrank quite a bit as it dried. 

So, not really what I expected but really good to know (if I ever want to make a rocky dried up desert base..). 

I'll just cake on another layer of the filler mixed with something non-absorbent. Something that will give it a more asphalt structure too.

Then I did a quick dry-fit of the model on the base.. it looks like it just might work. 

Thanks for looking, let me know what you think!

Auricom Griffon Base Build

Been working on the base. I had a design and based on that I drew a template, printed it out and used that to build a cardboard model... I had a pic of that but the SD card got corrupted (yes it does corrupt data when you just rip it out of your machine ahah).

Anyway here the template:

When I saw how that worked I used the cardboard to cut some 1.5 mm thick styrene sheet to size and built the walls around a pressed wood base (not sure what the english is for this type of wood product).

After this I started thinking about how I was going to fix the model to the base... I want it to hover over the base under an angle and that turned out to be a bit of a ball ache. The model is quite a bit heavier than I thought.

the first attempt was to drill and glue in two 2mm pieces of copper rod into the bottom, but that wasnt' strong enough and I couldn't secure them into the mainly styrofoam base... the second attempt was to get a long bit of threaded bar (4 mm thick) but that the nut I glued into the bottom of the model didn't hold. I used green stuff and SG but to no avail. beside it woul dhave cause problems when putting the model on the base I there most likely would not have been enough room for the thing to turn enough times to get it close enough to the base...

Anyway nou I've put in a piece of styrene tube (inner circumference of 4mm) and I'm going to glue in a piece transparent styrene rod into the model and then when the base is finished but glue the rod into the tube... fingers crossed.

Cut out a square block out of the base layer of styrofoam. stuck it in place with a lump of milliput and filled in the hole with plaster. I will further secure it later by glueing a pieve of styrene sheet with a hole in it over the square hole (havein the tube stick through). 

Then I'll build up the rest of the base with more layers of styrofoam and fill up all the holes with that acrylic filler stuff

Lot of talk, not much to see.

More exciting posts later.